Projects
On these pages, you will find a selection of projects we have collaborated on and the results we have achieved for our clients.
Crash Simulation of a Composite Electric Vehicle
SmartCAE managed the project using the engineering methodology typically adopted in motorsport composite development.
Optimization of the Carbon Fiber Monocoque Layup for a Supercar
SmartCAE managed the entire process, from fine-tuning the computational model to defining optimized layup solutions that could be directly compared with one another.
Optimization of the Carbon Fiber Bicycle Frame Layup
SmartCAE took full responsibility for setting up the optimization workflow, starting with a review of the FEM model and the criteria used to assess the required stiffness levels under the different load cases.
Kinematic and Dynamic Analysis of an Engine
SmartCAE developed a multibody dynamics model representing the engine architecture through rigid bodies, joints, and compliant constraints.
Topology Optimization of a Transmission Housing
SmartCAE developed a structured simulation workflow that transformed the initial unribbed housing into a fully optimized and validated structural design.
Dynamic Optimization of a Stone Polishing Machine
SmartCAE performed the dynamic optimization of a stone polishing machine.
Structural Analysis of Planet Carrier Assemblies for a Transmission System
SmartCAE managed the complete simulation workflow, from preparing the finite element model directly from the CAD geometry to the engineering interpretation of the simulation results.
Optimization of a Reciprocating Compressor Connecting Rod
SmartCAE developed a detailed finite element model of the connecting rod assembly to predict its structural response under representative service conditions.
Thermal-Fluid Analysis of a Domestic Oven
SmartCAE carried out a CFD-based thermo-fluid analysis of domestic ovens.
Kinematic and Fatigue Analysis of a Synchro Fitness Machine
SmartCAE collaborated on the analysis of a synchro fitness machine to determine the fatigue strength of its most highly stressed components.
Aerodynamic Optimization of an Aircraft Engine Cowling
SmartCAE collaborated on the aerodynamic optimization of an aircraft cowling using CFD analysis.
FEM–Test Correlation of an Industrial Manipulator Robot
SmartCAE developed and validated the finite element model of an industrial robot manipulator to determine its modal characteristics.
Aerodynamic Simulation of a Runner Training Shield
SmartCAE helped Vins Motors develop the aerodynamic shape of a training shield for competitive runners.
Design of a Composite Structure for a Space Sensor
SmartCAE contributed to the design and experimental validation of a satellite sensor featuring a composite structural enclosure.
Carbon Fiber Drill Box for the ExoMars Rover
SmartCAE performed the finite element modeling and structural analysis of the carbon fiber drill box for the ESA ExoMars rover mission.
Composite Layup Optimization of a High-Performance Powerboat Hull
SmartCAE optimized the composite laminate stacking sequence of a high-speed powerboat hull.
Roof Crush Simulation for Supercars and Hypercars
SmartCAE contributed to the design of carbon fiber roofs for high-performance sports cars by simulating roof crush tests.
Composite Layup Optimization of the Vins Duecinquanta
SmartCAE helped Vins Motors redesign the composite laminate of the Duecinquanta carbon fiber monocoque motorcycle to improve structural performance while simplifying manufacturing.
Carbon Fiber Monocoque Homologation
SmartCAE supported the development of racing cars by simulating homologation tests for carbon fiber monocoque structures.